description2
Type I Laboratory Ultra Pure Water System SSY-UPH2.0-20L/40L/60L
Product Introduction
SSY-C Ultra Pure Water Treatment Systems Process Flow Diagram:
SSY-C-750L Type II Ultrapure Water Systems Installation layout:
CSSY Type II Ultra Pure Water Systems Application Environment
Clinical chemistry
Clinical diagnostic
Clinical laboratory
Clinical and laboratory
Analytical chemistry
Clinical medical diagnosis
Immunochemistry
Clinical analysers
In vitro diagnostic instrument
Full laboratory automated testing system
Biochemical analysis
Fully Biochemical immunoassay pipeline
Modular biochemical detection system
Automatic biochemical analyzer
Immunoassay
Fully Automated Immunoassay Analyzers
Chemiluminescence Immunoassay System
Chemiluminescence immunoassay system
Technical Parameters of SSY-C-750L Ultrapure Water Purification System
1, water intake requirements: urban tap water, water pressure 0.2-0.4mpa,TDS≤300ppm.
*2, the total water production of the system: 750L/H (25℃ inlet water temperature).
*3, water quality: water quality meets the standard requirements of GB6682-2008 analysis laboratory water specifications and test methods, electrical conductivity < 0.055us/cm, resistivity ≥ 18mω.cm (raw water TDS≤300ppm).
4, the core components of the system, such as: pump, film, valves, instruments, control devices are imported or domestic first-line brands, after long-term experience demonstration, fully ensure the stable operation of the equipment.
*5, the reverse osmosis system is designed with a cyclic pulsating flushing function, which automatically enters the flushing procedure according to the set time to prevent the film performance attenuation (provide third-party certification materials).
*6, the use of concentrated water intelligent recycling patent technology to improve the utilization rate of raw water (provide third-party certification materials).
*7, the use of multistage automatic pre-treatment system, according to the set time automatically into the regenerative flushing state (provide third-party certification materials).
8, equipped with 7-inch high-definition touch screen, real-time display of operating status information, support for historical data query.
9, design two working modes, automatic function failure, you can choose manual operation, does not affect the normal operation of the equipment.
10. In addition, the water leakage detection and protection system is added. Once water leakage occurs during operation, the high-sensitivity probe senses the water leakage and immediately conducts an emergency power cut to avoid serious water leakage.
11, power requirements: AC220V/50HZ, the machine running power of 2.5kw.
12, reverse osmosis host and transmission pipeline without dead chamber design, system water production is live water circulation, to avoid secondary pollution of water quality. The system has automatic flushing and detection functions.
13, optional remote monitoring, remote switch, parameter modification, program upgrade and other functions.
14, optional remote water meter, real-time statistics of water consumption information, can be real-time monitoring in the remote APP side.
15, PLC intelligent man-machine control, system operating status and important operating data can be real-time online monitoring. Automatic liquid level protection, automatic stop when water is full, high and low pressure protection, water leakage detection, over and over load protection. Water quality online monitoring, after exceeding the standard, display alarm information, and automatic discharge.
*16, the use of slow closing slow opening design, reduce the water hammer effect and probe clogging risk, greatly reduce the failure rate of equipment.
*17, the equipment manufacturer belongs to the science and technology enterprises, AAA credit rating enterprises, through the ISO9001 and ISO45001, ISO14001, CE certification (provide relevant materials proof).
*18, the equipment manufacturer has obtained the national high-tech enterprise certification, and has obtained the relevant water sanitation approval permit (provide relevant material proof).
Clinical Laboratory SSY-C-750L Type II Ultra Pure Water System Consumables List with Replacement Period
No. |
Name |
Specification |
Quantity |
Replacement Period |
1 |
Quartz Sand |
/ |
100 KG |
2-3 years |
2 |
Activated Carbon |
HT002 |
50 KG |
2-3 years |
3 |
Softening Resin |
RZ001 |
75 L |
2-3 years |
4 |
PP Cotton |
PC007 |
5 Pieces |
3-6 months |
5 |
Soft Water Salt |
RS001 |
10 KG |
Every 7-10 days 5KG each time |
6 |
Ion Separation Membrane |
MM011L |
3 Pieces |
1-2 years |
7 |
Ion Catcher |
SZ002 |
65 L |
Replace according to conductivity requirements |
8 |
Folding Filter |
ZD005 |
1 Piece |
1 year (Terminal Microfiltration) |