Leave Your Message

description2

SSY-CG Pure Water Treatment System

Product Introduction

Water quality: in line with the national standard hospital disinfection supply center WS310.1/2/3-2016.
Single-stage reverse osmosis pure water machine pure water conductivity:
≤15μs/cm,meet the cleaning water specifications in this standard.
Quality of water produced: Meet GB5749-2006 "Sanitary Standards for Drinking Water", TDS≤300ppm.
Application:It is suitable for cleaning and disinfecting medical instruments, utensils and articles in hospital supply disinfection center, supporting ultrasonic cleaning machine, steam water for pressure steam sterilizer, etc.
  • CG-pure-water-treatment-system8cj
  • CG-process-flow-diagramkxq

Technical Features

1. Pre-treatment system,automatic control mode, automatic regeneration flushing.
2. Reverse osmosis system, automatic positive and negative low pressure flushing function to avoid the formation of concentration polarization phenomenon, extend the service life of the film.
3. Efficient salt removal technology, more suitable for high salt content areas, emergency mode function, to solve the uninterrupted water production.
4. Operating status indication, high and low water level indication, pressure failure indication.
5. Water leakage protection, automatic water leakage detection sensor, water leakage in time to cut off water.

Model

Capacity

Power

Input Power

Overall Size

SSY-CG-500L

500L/H

2.2KW

AC220V/50HZ

1200*700*1660mm

SSY-CG-750-1500L

750/1000/1500L/H

3KW/4KW

AC380V/50HZ

1600*750*1660mm

SSY-CG-2000L

2000L/H

10KW

AC380V/50HZ

1200*750*1660mm

SSY-CG-3000-6000L

Customized

Technical Parameter

Model:

SSY-CG-500/750/1000/1500/2000L/H

Capacity:

500/750/1000/1500/2000L/H

Environment Temperature:

5-45℃

Raw Water Pressure:

0.2-0.4Mpa

Productive Water Quality Index:

one stage conductivity value:<15μs/cm;two-stage conductivity value:≤5μs/cm@25℃

Bacterial Removal Rate≥99.6%  Particle (>0.2μm) <1 piece/ml

Ion Retention Rate:97%-99%    Organic matter retention rate>99%

Meet WS 310.1.2.3-2016 Technical Specification for Cleaning and Disinfection of Hospital Disinfection Supply Center (Supply Room)

Application:

Hospital supply clean and disinfection department,supporting ultrasonic cleaning machine, steam water for pressure steam sterilizer.

SSY-CG Process Flow Diagram

Raw water → Raw water tank → Raw water pump → Quartz sand tank → Activated carbon tank → Resin softening tank → Salt tank → Precision filter → High pressure pump → Reverse osmosis membrane → Pure water tank → Delivery pump → water use point


Leave Your Message