description2
SSY-UPH2.0 Laboratory Ultra Pure Water System
Product Introduction
Laboratory ultra pure water system is a production of extremely pure water, which means that the conductive medium in the water is almost completely removed, while the non-dissociated gases, colloids and organic matter (including bacteria) are also removed to a very low degree of water. The product is an enhanced three-stage pre-treatment system to effectively remove impurities and particulate matter; One machine dual-use, can be used RO pure water and UP ultra-pure water; The system adopts two-stage reverse osmosis design.
According to standard “GB/T6682-2008”,“GB/T33087-2016”,“YYT1244-2014”,“WS/T 574-2018”.
Application: PCR,DNA sequencing,TOC detection,IC,HPLC,GC-MS,ICP-MS,AA gel analysis.
Technical Features
1. Intelligent color touch screen operating system, one-click operation, rich configuration screen real-time online display of equipment operating status information.
2. Originally imported from the United States Dow reverse osmosis membrane, to ensure pure water quality, extend the service life of the post-purification column.
3. The use of NSF certified pipes and joints greatly reduces the amount of TOC precipitation in the system and ensures the quality of produced water.
4. Using imported double wavelength ultraviolet sterilizer, efficient sterilization, reduce TOC content.
5. Two-stage reverse osmosis process.
6. EDI continuous electric desalting process is adopted, the effluent water quality is stable, and automatic regeneration can be realized.
Model |
Capacity |
Power |
Input Power |
Overall Size |
SSY-UPH2.0-20/40/60L |
20/40/60L/H |
350W |
AC220V/50HZ |
670*530*1270mm |
Technical Parameter
Model: |
SSY-UPH2.0-20/40/60L/H |
Capacity: |
20/40/60L/H |
Resistivity 25℃: |
15-18.2MΩ.cm |
TOC: |
<5ppb |
Bacteria: |
≤0.01CFU/ml |
Pyrogen/Endotoxin |
<0.001EU/ml |
RNases |
<1pg/ml |
DNases |
<5pg/ml |
Heavy metal ion |
<0.01ppb |
Particulate and Bacteria Retention Rate |
>99.9% |
One-stage RO Conductivity |
Conductivity≈Raw water conductivity*2% |
Two-stage RO Conductivity |
≤5μs/cm |
Raw water requirement |
Meet GB5749-2006 urban drinking tap water, water temperature 5-45°C, water pressure 0.2-0.4Mpa. |
Size |
670*530*1270mm |
Electrical requirement |
AC220/50Hz |
Power |
350W |
Application |
PCR,DNA sequencing,TOC detection,IC,HPLC,GC-MS,ICP-MS,AA gel analysis |
SSY-UPH2.0 Process Flow Diagram
Raw water → Wire wound filter element → CTO filter element → PP filter element → One-stage high pressure pump → One-stage reverse osmosis membrane → Two-stage high pressure pump →Two-stage reverse osmosis membrane → Sterile water tank → EDI System→Ultraviolet sterilizer→UF ultrafiltration system→PES terminal microfiltration→Water point